×

Jot us a note and we’ll get back to you as quickly as possible.

VDI2700

WHEEL SAFETY DEVICE PROLUX GRIP ACCORDING TO VDI 2700 8.1

Lashing systems for securing loads on transport vehicles must comply with the loading guidelines from the German Association of Engineers (VDI) 2700 Sheet 8.1 (Load securing on road vehicles - Securing of cars and light commercial vehicles on vehicle transporters) and 8.2 (Load securing on road vehicles - Securing of heavy commercial vehicles on vehicle transporters).

The new VDI has not yet been adopted, but as we have already carried out all the necessary tests for VDI 2700 8.1 for our wheel securing belts by the German Technical Inspection Agency (TÜV Süd), we can already mention this here.

!

Our new ProLux Grip wheel safety device fulfils the requirements of the currently valid VDI 2700. Our new ProLux Grip wheel safety device has the following specifications:

  • Car preload force (STF) determined at 330 daN
  • Force transmission shown with ETA value is ≥ 0.5
    This means that at least 50% of the applied force reaches the opposite side
  • Webbing elongation < 4%
  • 35 mm belts LC direct 1500 daN, 50 mm belts LC direct 2500 daN
  • The length of the ProLux Grip 35 and ProLux Grip 50 controllers is 1100 mm, meaning that 180° overtensioning can be achieved on almost all wheels

Controller

The new ProLux Grip 35 and ProLux Grip 50 controller is characterised by its own label.

  • ETA value ≥ 0.5
  • Length: 1100 mm
  • Combination of tensioning strap/controller: For the best interaction between strap and controller, this has been tested by the German Technical Inspection Agency (TÜV Süd).


Information for easy identification

1

Name of the manufacturer / brand name / type designation of the controller

2

Length of belt controller

3

TÜV SÜD test

4

ETA value (efficiency)



Lashing strap with Fliplabel

The lashing straps used for the transport of cars must comply with DIN EN 12195-2 and fulfil the following minimum requirements:

  • Applicable standard: DIN EN 12195-2
  • Elongation: ≤ 4%
  • LC: 1,500 daN
  • Webbing width: at least 35 mm











1

Technical Inspection Agency SÜD test

2

ETA value (efficiency)

3

Prolux article number

4

Traceability number

5

DIN EN standard

6

LC Lashing Capacity - load capacity of the lashing strap

7

SHF Standard Hand Force = hand force

8

STF Standard Tension Force = pre-tensioning force

9

Elongation < 4 %

10

Total length



ORDER WHEEL SAFETY DEVICE PROLUX GRIP ACCORDING TO VDI 2700 8.1

DO YOU HAVE ANY QUESTIONS?

We will be pleased to help you! Please contact us:

+49 7304 9695 100

[email protected]

We can't find products matching the selection.
All prices excl. VAT and Shipping

All prices in Euros without VAT, excl. shipping. Changes and errors excepted. Pictures are similar. Only while stocks last. Please observe the promotion run-time (see action)! Promotional prices cannot be combined with other offers/discounts. Our „instead of“ prices refer to our current valid catalogue prices.